FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1443027.png)
c. Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light.
d. for Front Side:
1. Remove the 2 wire harnesses from the 2 claws of the room light.
2. Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light switch base.
e. for Rear Side:
1. Remove the wire harness from the claw of the room light.
2. Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light switch base.
51. REMOVE INSTRUMENT PANEL REGISTER ASSEMBLY
52. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
53. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL SUB-ASSEMBLY