FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-962001.png)
Acceleration/Deceleration Sensor: Testing and Inspection
INSPECTION
1. INSPECT YAW RATE AND DECELERATION SENSOR
a. Check the yaw rate and deceleration sensor.
If any of the following occurs, replace the yaw rate and deceleration sensor with a new one.
-
The surface of the yaw rate and deceleration sensor is cracked, dented or chipped.
-
The connector is scratched, cracked, or damaged.
-
The yaw rate and deceleration sensor has been dropped.
