FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
(c)
Use tags or labels to identify the place to reconnect each line.
(d) Remove the 4 nuts and pull out the hydraulic brake booster.
(e)
Remove the gasket from the hydraulic brake booster.
INSTALLATION
1. INSTALL HYDRAULIC BRAKE BOOSTER
(a)
Install a new gasket onto the hydraulic brake booster.
(b) Install the hydraulic brake booster with the 4 nuts.
Torque: 14 N*m (145 kgf*cm, 10 ft.*lbf.)
(c)
Using SST, connect the 4 brake tubes to the correct positions on the hydraulic brake booster, as shown in the illustration.
SST 09023-00101
Torque: for use without SST 15 N*m (155 kgf*cm, 11 ft.*lbf.)
for use with SST 14 N*m (143 kgf*cm, 10 ft.*lbf.)