FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Air Register: Technical Service Bulletins
A/C, Interior - R/H AC Register Removal & Installation
BODY
BO020-07
Title:
NEW STYLE RIGHT-HAND VENT
REGISTER REMOVAL.
INSTALLATION INSTRUCTIONS
Models:
'07 - '08 FJ Cruiser
December 8, 2007
Introduction
Later production FJ Cruiser vehicles are equipped with a new design right-hand AC vent register, utilizing an attaching bolt and a plastic trim cover. This
TSB provides the removal and installation instructions for the new type vent register.
Applicable Vehicles
^
2007 - 2008 model year FJ Cruiser vehicles produced BEFORE the Production Change Effective VINs shown below.
Production Change Information
Warranty Information
Removal Procedure
Vent Register Removal: Previous Version
1.
Remove the push type lower clip.
2.
Disengage the 4 clips and 2 claws and lift the vent register away from the dash.
NOTE:
To avoid damage to the register, make sure the vent louvers are in the open position when removing the vent register from the dash.