FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Condenser HVAC: Testing and Inspection
CONDENSER
ON-VEHICLE INSPECTION
1. INSPECT COOLER CONDENSER ASSEMBLY
a. If the fins of the cooler condenser assembly are dirty, clean them with water and dry them with compressed air.
NOTE: Do not damage the fins of the cooler condenser assembly.
b. If the fins of the cooler condenser assembly are bent, straighten them using a screwdriver or pliers.
2. CHECK CONDENSER FOR REFRIGERANT LEAKAGE
a. Check the pipe joints for gas leakage, using a halogen leak detector.
b. Check the tightening torque of the joints if gas leakage is detected from any pipe joints.