FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1247007.png)
9. INSTALL MODE CONTROL SERVO MOTOR
a. Install the mode control servo motor with the 3 screws.
Blower Unit
DISASSEMBLY
1. REMOVE AIR INLET CONTROL SERVO MOTOR
a. Remove the 2 screws and remove the air inlet control servo motor.
2. REMOVE BLOWER MOTOR
a. Remove the 3 screws and the blower motor.
3. REMOVE BLOWER RESISTOR
a. Remove the 2 screws and the blower resistor.
