FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
2. INSTALL CLEAN AIR FILTER SUB-ASSEMBLY
a. Engage the 2 claws and install the air filter.
NOTE: Install the air filter with its UP mark oriented in the correct direction.
3. INSTALL BLOWER RESISTOR
a. Install the blower resistor with the 2 screws.
4. INSTALL BLOWER MOTOR
a. Install the blower motor with the 3 screws.
5. INSTALL AIR INLET CONTROL SERVO MOTOR
a. Install the air inlet control servo motor with the 2 screws.