FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Housing Assembly HVAC: Testing and Inspection
Blower Unit
INSPECTION
1. INSPECT AIR INLET CONTROL SERVO MOTOR
a. Inspect the servo motor operation.
1. Connect the positive (+) lead from the battery to terminal 5 (IG+) and negative (-) lead to terminal 1 (FRS), then check that the lever turns
to the FRESH side smoothly.
Standard: The motor operates smoothly.
If the operations are not as specified, replace the air inlet control servo motor.
2. Connect the positive (+) lead from the battery to terminal 5 (IG+) and negative (-) lead to terminal 2 (REC), then check that the lever turns
to the RECIRCULATION side smoothly.
Standard: The motor operates smoothly.
If the operations are not as specified, replace the air inlet control servo motor.