FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
(c)
Install the dust cover and axle hub onto the steering knuckle with the 4 bolts.
Torque: 80 N*m (816 kgf*cm, 59 ft.*lbf)
5. INSTALL KNUCKLE GREASE RETAINER CAP (for 2WD)
(a)
Using a brass bar and a hammer, install a new retainer cap.
NOTICE: Do not damage the retainer cap.
6. INSTALL STEERING KNUCKLE OIL SEAL (for 4WD)
(a)
Using SST and a press, install a new oil seal.
SST 09527-17011, 09950-70010 (09951-07100), 09951-01000
INSTALLATION
1. INSTALL FRONT AXLE ASSEMBLY
2. INSTALL FRONT UPPER SUSPENSION ARM
(a)
Install a new nut and a new clip.