FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Diagram Legend
[P] : Indicates reference pages showing the parts locations in the system circuit on the vehicle.
Example : Code H4 (Light Failure Sensor).
-
The first character of the code indicates the alphabetical code allocated to the wire harness, and the second character indicates the serial
number of the parts connected to the wire harness.
[Q]: Indicates the reference page showing the position on the vehicle of Relay Block Connectors in the system circuit.
Example : Connector "1" is described and is installed on the left side of the instrument panel.
[R] : Indicates the reference page showing the position on the vehicle of J/B and Wire Harness in the system circuit.
Example : Connector "3C" connects the Instrument Panel Wire and J/B No.3. It is described and is installed on the instrument panel left side.
[S] : Indicates the reference page describing the wiring harness and wiring harness connector (the female wiring harness is shown first, followed by the
male wiring harness).
Example : Connector "CH1" connects the Engine Room Main Wire (female) and Instrument Panel Wire (male). It is described and is installed on
the left side kick panel.
[T] : Indicates the reference page showing the position of the ground points on the vehicle.
Example : Ground point "H2" is described and is installed on the back panel center.
How to Read Connector List
HOW TO READ CONNECTOR LIST