FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-73001.png)
Power Mirror Switch: Testing and Inspection
INSPECTION
1. INSPECT OUTER MIRROR SWITCH
a. Check the resistance.
1. Select L on the left/right adjustment switch.
2. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
If the result is not as specified, replace the outer mirror switch.
3. Select R on the left/right adjustment switch.
4. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
