FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-152002.png)
4. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Remove the 2 screws.
b. Disengage the 4 clips and remove the integration control and panel.
INSTALLATION
1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Engage the 4 clips and install the integration control and panel.
b. Install the 2 screws.
2. INSTALL INSTRUMENT PANEL GARNISH LH
3. INSTALL INSTRUMENT PANEL GARNISH RH
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)