FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Air Flow Meter/Sensor: Service and Repair
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE V-BANK COVER
3. REMOVE MASS AIR FLOW METER
a. Disconnect the connector.
b. Remove the 2 screws, then remove the mass air flow meter.
INSTALLATION
1. INSTALL MASS AIR FLOW METER
a. Install the mass air flow meter with 2 screws.
b. Connect the connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)
3. INSTALL V-BANK COVER