FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1067002.png)
5. REMOVE COWL SIDE TRIM BOARD LH
6. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
7. SEPARATE HOOD LOCK CONTROL LEVER SUBASSEMBLY
8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
9. REMOVE LOWER INSTRUMENT PANEL LH
10. REMOVE INSTRUMENT PANEL SIDE BRACKET
a. Remove the bolt and remove the instrument panel side bracket.
11. SEPARATE MAIN BODY ECU (DRIVER SIDE J/B)
a. Remove the 2 nuts and separate the main body ECU.
12. REMOVE CLUTCH SWITCH ASSEMBLY
a. Disconnect the connector.
b. Loosen the nut and remove the clutch switch assembly.
INSTALLATION
