FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1078004.png)
a. Install the starter assembly with 2 bolts.
Torque: 37 N.m (377 kgf.cm, 27 ft.lbf)
b. Connect the wire harness to the terminal 30, then install the nut.
Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf)
c. Connect the terminal 50 connector to the starter assembly.
2. INSTALL WIRE HARNESS
a. Install the wire harness onto the cylinder block with the bolt.
Torque: 13 N.m (133 kgf.cm, 10 ft.lbf)
3. INSTALL NO.2 EXHAUST MANIFOLD STAY
a. Install the No. 2 manifold stay with the 3 bolts.
