FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Starter Relay: Testing and Inspection
STARTER RELAY
ON-VEHICLE INSPECTION
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE STARTER RELAY
a. Remove the relay block cover upper.
b. Remove the starter relay.
3. INSPECT STARTER RELAY
a. Check the resistance.
1. Using an ohmmeter, measure the resistance between the terminals.
If the result is not as specified, replace the starter relay.
4. INSTALL STARTER RELAY
a. Install the starter relay.
b. Install the relay block cover upper.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL