FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Alignment: Service and Repair
NOTICE: For Zero Point Calibration information, please refer to: TSB T-SB-0020-8 (3/25/08).
FRONT WHEEL ALIGNMENT
ADJUSTMENT
1. INSPECT TIRES
2. MEASURE VEHICLE HEIGHT
Vehicle height
Measuring points:
A: Ground clearance of front wheel center
B: Ground clearance of adjustment cam bolt center
C: Ground clearance of rear wheel center
D: Ground clearance of lower control arm set bolt center
NOTICE: Before inspecting the wheel alignment, check the vehicle height.
Bounce the vehicle up and down at the corners to stabilize the suspension before inspecting the vehicle height.