FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
![background image](/toyota/fj_cruiser_4wd/v6-4.0l_(1gr-fe)/Page-883001.png)
Fluid - Differential: Service and Repair
DIFFERENTIAL OIL
ON-VEHICLE INSPECTION
1. CHECK DIFFERENTIAL OIL
(a)
Stop the vehicle on a level surface.
(b) Remove the differential filler plug and gasket.
(c)
Check that the oil level is between 0 to 5 mm (0 to 0.20 in.) from the bottom lip of the differential filler plug hole.
NOTICE:
-
After changing the oil seal, drive the vehicle and then check the oil level again.
-
Too much or too little oil will lead to differential problems.
HINT: If necessary, fill the differential carrier assembly with hypoid gear oil.
Recommended viscosity
Oil grade
Front differential oil capacity
Rear differential oil capacity