FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
1. REMOVE REAR PROPELLER SHAFT ASSEMBLY (for 2WD)
(a)
Place matchmarks on the propeller shaft flange and differential flange.
(b) Remove the 4 nuts, 4 bolts and 4 washers.
(c)
Remove the propeller shaft assembly.
(d) Insert SST into the extension housing to prevent oil leakage.
SST 09325-40010
2. REMOVE REAR PROPELLER SHAFT ASSEMBLY (for 4WD)
(a)
Place matchmarks on the propeller shaft flange and transfer flange.
(b) Remove the 4 nuts and 4 washers.
(c)
Place matchmarks on the propeller shaft flange and differential flange.
(d) Remove the 4 nuts, 4 bolts, 4 washers and the propeller shaft assembly.
DISASSEMBLY
1. INSPECT REAR PROPELLER SHAFT ASSEMBLY
(a)
Check that the propeller shaft is not damaged or deformed.