FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
![background image](/toyota/fj_cruiser_4wd/v6-4.0l_(1gr-fe)/Page-889010.png)
(f)
Using a snap ring expander, install a new snap ring.
(g) Pack the inboard joint with grease.
Grease capacity: 231 to 241 g (8.1 to 8.5 oz.)
(h) Align the matchmarks and install the inboard joint onto the outboard joint shaft.
7. INSTALL INBOARD JOINT BOOT
(a)
Install the inboard joint boot into the grooves of the inboard joint and outboard joint shaft.
NOTICE: Keep the grooves free of grease.
8. INSTALL FRONT AXLE INBOARD JOINT BOOT NO. 2 CLAMP
(a)
Install the boot clamp onto the inboard joint boot and caulk the boot clamp with a screwdriver.
NOTICE: Do not damage the boot.
9. INSTALL FRONT AXLE INBOARD JOINT BOOT CLAMP
(a)
Install the boot clamp onto the inboard joint boot and caulk the boot clamp with a screwdriver.
NOTICE: Do not damage the boot.