FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Flex Plate: Technical Service Bulletins
A/T - Torque Converter Bolt Installation Precautions
T-SB-0014-11
February 17, 2011
Torque Converter Bolt Installation
Service Category
Drivetrain
Section
Automatic Transmission/Transaxle
Market
USA
Applicability
Introduction
The purpose of this TSB is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle
assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly. Use the information in
this bulletin when installing an automatic transmission/transaxle assembly.
NOTE
Not all applications will use washers on the torque converter bolts.
Warranty Information
Installation Procedure
^
When removing torque converter bolts and washers take special care that the same bolts and washers are used when installing the torque converter.
^
Using an incorrect size bolt or washer may cause damage to the torque converter assembly.