FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
4. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY
5. REMOVE TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL
6. REMOVE TRANSFER CASE OIL SEAL
(a)
Using SST, tap out the oil seal.
SST 09308-00010
NOTICE: Be careful not to damage the oil seal and case front contact surface.
INSTALLATION
1. INSTALL TRANSFER CASE OIL SEAL
(a)
Coat the lip of a new oil seal with MP grease.
(b) Using SST and a hammer, tap in the oil seal until its surface is flush with the case upper surface.
SST 09316-60011 (09316-00011)
2. REMOVE TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL
3. INSTALL OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY
4. INSTALL FRONT PROPELLER SHAFT ASSEMBLY
5. INSTALL LOWER TRANSFER CASE PROTECTOR
(a)
Install the protector with the 5 bolts.
Torque: 18 N*m (183 kgf*cm, 13 ft.*lbf)
(b) Install the brake hose clamp.
6. ADD TRANSFER OIL
7. CHECK FOR TRANSFER OIL LEAKAGE
Extension Housing Oil Seal
EXTENSION HOUSING OIL SEAL