FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
![background image](/toyota/fj_cruiser_4wd/v6-4.0l_(1gr-fe)/Page-1701002.png)
1. REMOVE FRONT WIPER BLADE
a. Disengage the claw as shown in the illustration.
NOTE: Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.
2. REMOVE FRONT WIPER RUBBER
a. Remove the wiper rubber from the wiper blade.
b. Remove the 2 wiper rubber backing plates from the wiper rubber.
INSTALLATION
1. INSTALL FRONT WIPER RUBBER
a. Install the 2 wiper rubber backing plates onto the wiper rubber.
NOTE: Install the backing plates facing the correct direction.