FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1702002.png)
1. REMOVE REAR WIPER BLADE ASSEMBLY
a. Disengage the claw as shown in the illustration.
NOTE: Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.
2. REMOVE REAR WIPER RUBBER
a. Remove the wiper rubber from the wiper blade.
b. Remove the 2 wiper rubber backing plates from the wiper rubber.
INSTALLATION
1. INSTALL REAR WIPER RUBBER
a. Install the 2 wiper rubber backing plates onto the wiper rubber.
NOTE: Install the backing plates facing the correct direction.
