Highlander 2WD V6-3.0L (1MZ-FE) (2003)
/Page-211001.png)
Wiper Switch: Service and Repair
WINDSHIELD WIPER SWITCH
REPLACEMENT
1. REMOVE STEERING COLUMN COVER LWR
2. REMOVE STEERING COLUMN. UPR COVER
3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
a. Disconnect the connector.
b. Using a screwdriver, press the claw shown in the illustration to disengage it is meshing and remove the windshield wiper switch assembly.
NOTE: Pressing the claw hard breaks the claw.
HINT: Tape the screwdriver tip before use.
