Highlander 2WD V6-3.3L (3MZ-FE) (2004)
/Page-24002.png)
(a) Check the resistance.
Standard:
If the result is not as specified, replace the switch.
NOTICE: When checking the ECT sensor in water, the terminals should be kept dry. After the check, dry the sensor.
4. INSPECT ECT SWITCH (NO.2)
(a) Check the resistance.
Standard:
If the result is not as specified, replace the switch.
NOTICE: When checking the ECT sensor in water, the terminals should be kept dry. After the check, dry the sensor.
