Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
![background image](/toyota/highlander_2wd/v6-3.3l_(3mz-fe)_hybrid/Page-1468012.png)
51. REMOVE ROOF SIDE RAIL GARNISH SUBASSEMBLY LH
(a) Disengage the 5 claws and 3 clips, and remove the roof side rail garnish sub-assembly.
52. REMOVE ROOF SIDE RAIL GARNISH SUBASSEMBLY RH
53. SEPARATE REAR NO.2 SEAT BELT ASSEMBLY OUTER LH
(a) Disengage the 2 claws and remove the cover.
HINT: Tape the screwdriver tip before use.
(b) Remove the bolt and separate the rear No.2 seat belt assembly outer.
54. SEPARATE REAR NO.2 SEAT BELT ASSEMBLY OUTER RH
55. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH
(a) Using a clip remover, disengage the clip (a).
(b) Disengage the 4 clips (B) and roof side garnish assembly inner.
56. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER RH
57. REMOVE TELEVISION BASE (W/ TELEVISION DISPLAY)
58. REMOVE TELEVISION DISPLAY ASSEMBLY (W/ TELEVISION DISPLAY)
59. REMOVE ASSIST GRIP SUB-ASSEMBLY