Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-965001.png)
Wheel Speed Sensor: Testing and Inspection
Front Speed Sensor
INSPECTION
1. INSPECT FRONT SPEED SENSOR
a. Inspect the front speed sensor. If any of the following occurs, replace the front speed sensor with a new one:
-
The surface of the front speed sensor is cracked, dented, or chipped off.
-
The connector is scratched, cracked, or damaged.
-
The front speed sensor has been dropped.
b. Measure the resistance according to the value(s) in the table.
c. Measure the resistance according to the value(s) in the table.