Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-484004.png)
b) Disconnect the horn connectors.
c) Remove the 5 bolts and the radiator support upper.
9. REMOVE FAN SHROUD
a) Disconnect the engine coolant reservoir hose.
b) Disconnect the cooling fan ECU connectors.
c) Remove the 4 bolts and the fan shroud.
10. REMOVE RADIATOR SUPPORT CUSHION
a) Remove the 2 radiator support cushions from the radiator supports.
11. REMOVE RADIATOR SUPPORT SUB-ASSEMBLY LH
a) Remove the 3 bolts and the radiator support LH.