Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
1. INSTALL NO.2 RADIATOR ASSEMBLY
a) Attach the radiator from the upper part.
NOTICE: Do not allow the cooler condenser and radiator to come into contact with each other.
LH
RH
b) Install the radiator and radiator support lowers with the 4 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
2. REMOVE RADIATOR SUPPORT SUB-ASSEMBLY LH
a) Install the radiator support LH with the 3 bolts.
Torque: Bolt A 5.0 Nm (51 kgf-cm, 44 inch lbs.)
Bolt B 3.9 Nm (40 kgf-cm, 35 inch lbs.)