Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
![background image](/toyota/highlander_2wd/v6-3.3l_(3mz-fe)_hybrid/Page-1274001.png)
Blower Motor Switch: Testing and Inspection
Rear Blower Main Switch
INSPECTION
1. INSPECT REAR HEATER MAIN SWITCH
a. Remove the rear heater main switch.
b. Disconnect the connector from the rear heater main switch.
c. Measure the resistance according to the value(s) in the table.
If the resistance is not as specified, replace the rear main switch
NOTE: While using the battery during inspection, do not bring the positive and negative tester probes too close to each other as a short circuit
may occur.