Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-507005.png)
c. Remove the 2 bolts and battery carrier duct (RH).
55. REMOVE HV BATTERY SERVICE HOLE COVER
a. Using the service plug grip, remove the battery cover lock striker.
HINT: Insert the projection part of the service plug grip, and turn the button of the battery cover lock striker counterclockwise, and release
the lock.
b. Remove the 2 bolts and battery service hole cover.
56. REMOVE BATTERY COVER SUB-ASSEMBLY
CAUTION: Wear insulating gloves.
a. Remove the bolt, then disconnect the No.3 wire frame.