Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
a. Install the HV relay assembly with the 3 nuts.
Torque:4.5 N.m (46 kgf.cm, 40 in.lbf)
b. Connect the 2 connectors on the HV relay assembly.
c. Connect the 2 main battery cable connectors on the HV relay assembly.
d. Install the No.3 wire frame on the HV relay with the 2 nuts.
Torque:9.0 N.m (92 kgf.cm, 80 in.lbf)
e. Install the No.3 wire frame connector on the HV relay assembly.
2. CHECK HIGH VOLTAGE CABLE CONNECTION
3. INSTALL BATTERY COVER SUB-ASSEMBLY