Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-536003.png)
b. Insulate the removed terminal with insulating tape.
NOTE: Make sure that the terminal does not stick out from the insulating tape.
c. Remove the 12 bolts and inverter cover.
17. VERIFY THAT VOLTAGE OF W/CONVERTER INVERTER ASSEMBLY IS 0V
CAUTION: Wear insulating gloves.
NOTE:
-
Make sure that the inverter converter is temporarily installed before working on the converter inverter assembly.
-
Do not allow any foreign objects or waterdrops to enter the w/ converter inverter assembly.
a. Using the voltmeter, measure the voltage between the terminals of the 2 phase connectors (N-P).