Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
a. Connect the 2 water hoses with the 2 clamps to the inverter reserve tank sub-assembly.
b. Install the inverter reserve tank with the 2 bolts to the w/ converter inverter assembly.
Torque:10 N.m (102 kgf.cm, 7 ft.lbf)
14. CONNECT ENGINE ROOM WIRE NO.2
a. Connect the engine room wire No.2 with the nut.
Torque:8.5 N.m (87 kgf.cm, 75 in.lbf)
15. CONNECT CIRCUIT BREAKER SENSOR NO.1
a. Connect the circuit breaker sensor No.1 connector.
16. INSTALL POWER STEERING ECU ASSEMBLY
17. INSTALL INVERTER BRACKET NO.5