Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-1706005.png)
a. Coat the installation part of the windshield glass adhesive dam with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Throw away any leftover Primer G.
-
Do not apply too much Primer G.
b. Install a new dam, applying double-sided tape all the way around the glass except where the stoppers are installed, as shown.
4. INSTALL WINDOW GLASS NO.2 ADHESIVE DAM
5. INSTALL WINDSHIELD GLASS
a. Clean and shape the contact surface of the vehicle body.
1. Using a knife, cut away any rough adhesive on the contact surface of the vehicle body to ensure the appropriate surface shape.
NOTE: Be careful not to damage the vehicle body.
HINT: Leave as much of the adhesive on the vehicle body as possible.
2. Clean the contact surface of the vehicle body with a piece of shop rag saturated with cleaner
HINT: Even if all the adhesive has been removed, clean the vehicle body.