Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
6. REMOVE FRONT WIPER MOTOR
a. Using a screwdriver wrapped with the protective tape, separate the upper rod of the wind shield wiper link assembly from the crank arm pivot
of the front wiper motor as shown in the illustration.
b. Using a screwdriver wrapped with the protective tape, separate the lower rod of the wind shield wiper link assembly from the crank arm pivot
of the front wiper motor as shown in the illustration.
c. Using a "torx" socket wrench (T30), remove the 2 bolts and front wiper motor.
INSTALLATION
1. INSTALL FRONT WIPER MOTOR
a. Using a "torx" socket wrench (T30), install the front wiper motor with the 2 bolts.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)