Highlander 2WD V6-3.5L (2GR-FE) (2008)
DOOR LOCK: DOOR CONTROL TRANSMITTER (w/ Smart Key System): REMOVAL
REMOVAL
1. REMOVE TRANSMITTER BATTERY
(a) Remove the mechanical key.
(b) Insert a screwdriver into the gap, and turn the screwdriver to detach the cover.
HINT: Tape the screwdriver tip before use.
(c) Insert a screwdriver into the gap and gently remove the battery (lithium battery).
NOTICE:
-
Do not push the terminals with your finger.
-
Do not forcibly pry up the battery (lithium battery) because doing so will deform the terminals.
-
Do not touch the battery with wet hands. Water may result in corrosion.
-
Do not touch or move any components inside the transmitter because handling the components may interfere with proper operation of the
transmitter.
Installation
DOOR LOCK: DOOR CONTROL TRANSMITTER (w/ Smart Key System): INSTALLATION
INSTALLATION
1. INSTALL TRANSMITTER BATTERY