Highlander 2WD V6-3.5L (2GR-FE) (2008)
/Page-2190003.png)
^
2008 Highlander HV
^
2007/2008 Camry
^
2007/2008 Camry HV
For all vehicles, follow the procedure for removal of the hood lock assembly "with Engine Hood Courtesy Switch".
NOTE
Disconnect the control cable from the latch assembly but do NOT remove the control cable from the vehicle.
Installation
To reinstall follow the procedure in the repair manual for hood lock control cable assembly installation.
Refer to the TIS applicable model Repair Manual:
Vehicle exterior - Door/Hatch - "Engine Hood/Door: Hood Lock Control Cable Assembly: Installation"
^
2008 Highlander
^
2008 Highlander HV
^
2007/2008 Camry
^
2007/2008 Camry HV
