Highlander 2WD V6-3.5L (2GR-FE) (2008)
(c) Install the hood lock assembly with the 3 bolts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(d) Install the hood lock nut cap.
3. INSTALL HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)
(a) Apply MP grease to the sliding areas of the lock.
(b) Connect the hood lock control cable.
(c) Install the hood lock assembly with the 3 bolts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(d) Install the hood lock nut cap.