Highlander 2WD V6-3.5L (2GR-FE) (2008)
/Page-2362006.png)
Replacement/Reassembly
9. INSTALL REAR DOOR SERVICE HOLE COVER See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Removal and
Replacement/Reassembly
10. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Removal and
Replacement/Reassembly
11. INSTALL DOOR TRIM BOARD SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Removal and
Replacement/Reassembly
12. INSTALL DOOR ASSIST GRIP COVER See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Removal and
Replacement/Reassembly
13. INSTALL REAR DOOR ARMREST UPPER BASE PANEL See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Removal and
Replacement/Reassembly
14. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Removal and
Replacement/Reassembly
15. CONNECT NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization