Highlander 2WD V6-3.5L (2GR-FE) (2008)
/Page-2359001.png)
Power Door Lock Actuator: Testing and Inspection
Front Door Lock
DOOR LOCK: FRONT DOOR LOCK: INSPECTION
INSPECTION
1. INSPECT FRONT DOOR LOCK ASSEMBLY (for Driver Side)
(a) Apply the battery voltage to the motor terminals and check the operation of the door lock motor.
OK:
If the result is not as specified, replace the door lock assembly.
(b) Measure the resistance of the door lock position switch.
Standard resistance:
If the result is not as specified, replace the door lock assembly.
(c) Measure the resistance of the door key lock and unlock switch operation.