Highlander 2WD V6-3.5L (2GR-FE) (2008)
-
Make sure to use the removed bolt. (Do not use another bolt even if it is the same size.)
HINT:
-
Use a torque wrench with a fulcrum length of 18 cm (7.09 in.).
-
The effective length of SST (09961-00950) is 15 cm (5.9 in.).
(b) Install the 5 mm bi-hexagon wrench.
6. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY
(a) Install the idler pulley cover plate, No. 2 idler pulley cover plate and No. 2 idler pulley sub-assembly with the bolt.
Torque: 54 N·m (550 kgf·cm, 40ft·lbf)
HINT:
Plate diameter:
Idler pulley cover plate: 33.6 mm (1.32 in.)
No. 2 idler pulley cover plate: 37.8 mm (1.49 in.)
7. INSTALL NO. 1 FRONT ENGINE MOUNTING BRACKET LH