Highlander 2WD V6-3.5L (2GR-FE) (2008)
(a) Disconnect the connector.
(b) Remove the 2 screws and rear air mix control servo motor sub-assembly.
3. REMOVE REAR AIR OUTLET CONTROL SERVO MOTOR SUB-ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 screws and rear air outlet control servo motor sub-assembly.
4. REMOVE REAR AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
(a) Remove the packing.
(b) Remove the screw [C].
(c) Remove the screw [B].
(d) Remove the bolt [A].
(e) Remove the bolt and slide the hook connector.
(f) Remove the rear air conditioning tube and accessory assembly.
(g) Remove the 2 O-rings from the rear air conditioning tube and accessory assembly.
5. REMOVE HEATER WATER PIPE AND HOSE SUB-ASSEMBLY
(a) Using pliers, grip the claws of the 2 clips and slide the clips to disconnect the heater water hose.
(b) Remove the 2 screws and the heater water pipe and hose sub-assembly.