Highlander 2WD V6-3.5L (2GR-FE) (2008)
NOTE: While using the battery for the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit
may occur.
(d) Inspect the C/OPN relay.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NOTE: While using the battery for the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit
may occur.
(e) Inspect the A/F relay.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NOTE: While using the battery for the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit
may occur.