Highlander 2WD V6-3.5L (2GR-FE) (2008)
DOOR LOCK: DOOR CONTROL SWITCH: REMOVAL
REMOVAL
1. REMOVE FRONT ARMREST UPPER BASE PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Removal and Replacement/Disassembly
2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)
(a) Remove the 3 screws and the power window regulator master switch assembly.
3. REMOVE DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side)
(a) Disengage the 2 claws and remove the door control switch assembly.
Installation
DOOR LOCK: DOOR CONTROL SWITCH: INSTALLATION
INSTALLATION
1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)
(a) Install the power window regulator master switch assembly with the 3 screws.
2. INSTALL DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side)
(a) Engage the 2 claws and install the door control switch assembly.
3. INSTALL FRONT ARMREST UPPER BASE PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Removal and Replacement/Reassembly