Highlander 4WD L4-2.4L (2AZ-FE) (2001)
/Page-1243002.png)
c. Disconnect the connectors, then remove the bolts.
d. Disconnect the connector, then remove the bolt.
43. REMOVE ROOF HEADLINING ASSEMBLY
44. REMOVE ANTENNA CORD SUB-ASSEMBLY NO.3
a. Remove the antenna cord sub assembly No.3 from the roof headlining.
45. INSTALL ANTENNA CORD SUB-ASSEMBLY NO.3
a. Tape the antenna cord sub-assembly No.3 at the position of the roof headlining shown in the illustration.