Highlander 4WD L4-2.4L (2AZ-FE) (2001)
Item No. 1: Seat Back Popping Type Noise
1.
Remove the front seat back board as shown in the illustration.
2.
Align the wires "a" and "b," and place the clip near the center of the wires as shown.
Item No. 1: Seat Back Popping Type Noise
1.
Remove the front seat back board as shown in the illustration.
2.
Align the wires "a" and "b," and place the clip near the center of the wires as shown.