Highlander 4WD L4-2.4L (2AZ-FE) (2001)
e. Using SST, disconnect the 2 brake lines from the master cylinder, then remove the 2 brake lines.
SST 09023-00100
f.
Disconnect the actuator connector.
g. Remove the 3 nuts and brake actuator with bracket.
4. REMOVE ABS & TRACTION ACTUATOR ASSY [44540/98-85]
a. Remove the 2 nuts and ABS & TRACTION actuator from the bracket.
b. Remove the 2 holders and 3 cushions from the actuator.
5. REMOVE BRAKE ACTUATOR BRACKET ASSY [44590/98-85]
a. Remove the tube clamp bolt from the bottom side of the actuator bracket.
b. Remove the 4 bolts and brake actuator bracket.
6. INSTALL BRAKE ACTUATOR BRACKET ASSY [44590/98-85]