Highlander 4WD L4-2.4L (2AZ-FE) (2001)
/Page-911001.png)
Steering Angle Sensor: Service and Repair
REPLACEMENT
1. OBSERVE RESTRAINT SYSTEMS SERVICE PRECAUTIONS (See Restraint Systems).
2. SEPARATE BATTERY NEGATIVE TERMINAL
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE HORN BUTTON ASSY [45130/98-75]
5. REMOVE STEERING WHEEL ASSY [45100/98-75]
6. REMOVE STEERING COLUMN LWR COVER
7. REMOVE SPIRAL CABLE SUB-ASSY [84306/98-162]
8. REMOVE STEERING SENSOR [89245B]
9. INSTALL STEERING SENSOR [89245B]
10. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
11. INSTALL SPIRAL CABLE SUB-ASSY [84306/98-162]
12. INSTALL STEERING COLUMN LWR COVER
13. CENTER SPIRAL CABLE
14. INSTALL STEERING WHEEL ASSY [45100/98-75]
15. INSPECT STEERING WHEEL CENTER POINT
16. INSTALL HORN BUTTON ASSY [45130/98-75]
17. INSPECT SRS WARNING LIGHT.